Scilox BL100 Manual de usuario descargar pdf (Pagina 19)

BL100 User Manual

- 12 -

2.5 Delete User

2.5.1 Delete a user

1. Press button to start the deadbolt and enter the “Verify State”.

2. Enter the “Management Mode”, please see step 2 in 2.3.1 Enroll an Ordinary

User’s Fingerprint.

3. Press "3" on the deadbolt to enter “Delete User mode”.

4. Enter the User's ID which you want to delete, and then press button to

confirm. Enter the user ID again, and press key to confirm. The deadbolt

will sound a long beep, and the key will flash green.

5. After deleting the user, you can restart the deadbolt and verify the deleted user's

fingerprint or password again to assure the user has been deleted.

Note: The Administrator can't delete their self or the most recent

administrator.

2.5.2 Delete All Ordinary Users

1. Press button to start the deadbolt and enter the “Verify State”.

2. Enter the “Management Mode”, (see step 2 in 2.3.1 Enroll an Ordinary User’s

Fingerprint).

3. Press "6" on the deadbolt to enter “Delete All Ordinary Users” mode.

4. Enter "000" and press button to confirm, then enter "000" again and

press button to confirm. The deadbolt will sound a long beep, the -

button will flash green.

Note: The operation can only delete Ordinary Users. If you want to delete

administrators, you must reset the system, for detail, (see 2.7 Reset Deadbolt to

Factory Default Settings).

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 30 31

Sin comentarios

Scilox BL100 Manual de usuario Pagina 19